A tanning mitt is a type of glove or mitt specifically designed for the application of self-tanning products.
It is usually made of a soft, velvety material that helps to evenly distribute the product over the skin while preventing streaking or uneven patches.
Using a tanning mitt helps to ensure that the self-tanning product is applied smoothly and evenly, without leaving any unsightly streaks or blotches.
It also helps to prevent the self-tanning product from staining the palms of the hands, which can be difficult to remove.
To use a tanning mitt, apply a small amount of self-tanning product onto the mitt and gently rub it onto the skin, using circular motions.
Be sure to apply the product evenly. Blend it in around the edges of the skin to avoid harsh lines.
How to wash tanning mitt?
After use, rinse the tanning mitt thoroughly with warm water and allow it to air dry completely to remove any excess tanning product.
Apply a small amount of mild soap or detergent to the mitt and gently rub it to create a lather. Pay extra attention to the areas with stains.
Rinse the mitt thoroughly under warm running water until all the soap suds are gone.
Squeeze out any excess water and gently reshape the mitt back into its original shape.
Allow the mitt to air dry completely, avoiding direct sunlight or heat sources.
Follow our guidelines for properly drying of tanning mitt.
Gently squeeze out excess water from the mitt by pressing it between your palms. Lay the tanning mitt flat on a clean, dry towel.
Roll up the towel with the mitt inside and gently press down on it to absorb any remaining moisture.
Unroll the towel and remove the mitt. Hang the tanning mitt in a well-ventilated area to air dry completely.
If you need to use the mitt again soon, you can use a hairdryer on low heat to speed up the drying process, as a small amount of moisture on the tanning mitt can cause streaks or uneven tan.
The drying time of a tanning mitt depends on various factors like the material of the mitt, the amount of applied self-tanning product, and the temperature and humidity of the surrounding environment.
Generally, a tanning mitts made of a synthetic material such as polyester or nylon will dry faster than those made of a natural material like cotton.
Assuming that the mitt has been thoroughly rinsed with water, and excess water has been squeezed out, a tanning mitt made of synthetic material can air dry from a few minutes to an hour.
To speed up the drying process, gently squeeze out any excess water and then place the mitt on a towel or a drying rack in a well-ventilated area with low humidity and room temperature.
Avoid using heat sources like hair dryers or radiators, as these can damage the material of the mitt, especially high temperatures.
Once it’s dry, store the mitt in a clean, dry place until the next treatment.
With proper care and maintenance, a tanning mitt can be used multiple times, making it a cost-effective and convenient tool for achieving a flawless, sun-kissed glow.
How to use and maintain a tanning mitts?
A tanning mitt helps create a smooth and even application of self-tanning products, which can result in a more natural-looking tan.
Using a tanning mitt can prevent streaks and blotches that can occur when applying self-tanner with bare hands.
A tanning mitt can help keep your hands clean while applying self-tanning products.
On the other hand, purchasing a tanning mitt can add to the cost of self-tanning products.
Also, cleaning and maintaining the tanning mitt can be time-consuming and require additional effort.
Tanning mitts can only be used for self-tanning, so they may not be a worthwhile investment for those who don’t self-tan regularly.
Look for a mitt made of high-quality materials that is soft and durable.
Avoid cheaply made mitts that can cause irritation or leave lint on the skin.
Before using a tanning mitt, clean, exfoliate and dry your skin to remove dead skin cells and ensure an even application.
Put a small amount of self-tanning product on the mitt and start with a light layer.
Apply the product in circular motions and make sure to blend well.
When applying the self-tanner to uneven and less accessible areas such as hands, feet, knees, and elbows, use a small amount of product and blend well to avoid excess color buildup.
How to clean self-tanning mitt?
After use, rinse the mitt in warm water and allow it to air dry completely.
Store it in a cool, dry place until another self-tanning treatment.
Wash your tanning mitt after each use to ensure proper hygiene and maintain its effectiveness.
You can usually wash your tanning mitt in warm, soapy water or in a washing machine on a gentle cycle and allow it to air dry thoroughly before using it again.
Remember, avoid putting the mitt in the dryer or exposing it to direct sunlight.
If you want to wash your tanning mitt in a washing machine, check the care label to be sure it’s safe washing in a washer. If it is not recommended, wash tan mitt by hand instead.
On the other hand, if it is safe to wash in a machine, turn the tanning mitt inside out.
It will prevent any stains or residue from getting trapped inside the mitt.
Place the tanning mitt in a mesh laundry bag. It will help to protect it during the wash cycle and prevent it from getting tangled with other items in the machine.
Add a small amount of mild detergent to the machine, following the instructions on the detergent packaging.
Set the washing machine to a gentle cycle with cold water. Hot water can damage the tanning mitt and cause it to lose shape.
Once the wash cycle is complete, remove the tanning mitt from the mesh laundry bag and hang it to air dry.
Do not put it in the dryer, as this can cause shrinkage or damage to the mitt.
By following these steps, you should be able to safely wash your tanning mitt in a washing machine and keep it clean for future use.
If you don’t wash your tanning mitt, it can become a breeding ground for bacteria, which can cause skin irritation or infection.
Aside from that, the buildup of tanning products on the mitt can cause uneven application or streaking during future tanning sessions.
We introduce you to several types of tanning mitts available on the market so keep reading.
Velvet tanning mitts are made from a soft, velvety material that is gentle on the skin.
They are ideal for people with sensitive skin, as they help to prevent streaking and uneven application.
Dual-sided tanning mitts have a foam side for even application of self-tanner and a microfiber side for buffing and blending.
They are a good option for achieving a flawless, streak-free tan.
Foam tanning mitts are the most common type of tanning mitt.
They are made from a soft, sponge-like material that helps distribute self-tanner evenly across the skin.
Silicone tanning mitts are made from a non-porous material that is easy to clean and reusable.
They provide a smooth application and are great for those who want to avoid getting self-tanner on their hands.
Disposable tanning mitts are made from a thin, single-use material that is designed to be thrown away after use.
They are a suitable option for those who want to avoid the hassle of washing and drying reusable mitts.
Fake tanning mitt – use and characteristics
A fake tanning mitt is a type of applicator designed to assist in the application of self-tanning products, such as mousses, lotions, and sprays.
It is usually made of a soft and durable material like foam, velour, or microfiber that helps to ensure a smooth and even application of the product without leaving streaks or patches on the skin.
The mitt provides a barrier between your skin and the self-tanning product, ensuring that it is applied evenly and without streaks or patches.
The tan mitt is easy to use and allows for precise application, even in hard-to-reach areas like your back.
Using a tan mitt keeps your hands clean and prevents the self-tanner from staining your palms or nails.
Most tanning mitts are washable and can be used multiple times, making them a more eco-friendly and cost-effective option than disposable applicators.
While the mitt can help ensure even application, it can also make it easier to apply too much product, resulting in a darker or more intense tan than intended.
How to wash fake tan mitt?
Remember, after each use, the mitt must be cleaned thoroughly to avoid bacteria buildup, which can lead to skin irritation or infection.
Some tanning products may not work well with a mitt, such as those that require blending with the hands to achieve a more natural finish.
A fake tanning mitt can be good for achieving a flawless and even self-tan.
However, use it carefully and with the right products to avoid overapplication or skin irritation.
Regular cleaning and maintenance of the mitt are essential to ensuring its effectiveness and hygienic use.
Velvet, silicone and dual-sided tanning mitts
Velvet tanning mitts are a popular tool for applying self-tanner because they provide a smooth, streak-free finish.
It helps to avoid self-tanner staining on hands. It is easy to use and apply self-tanner evenly.
However, velvet tan mitt need more effort and time to apply self-tanner than applying self-tanner with bare hands.
Also, it can be more expensive compared to other tanning applicators.
We introduce guidelines for using velvet tanning mitt.
Before using a velvet tanning mitt, clean and dry your skin.
Apply a small amount of self-tanner to the mitt to avoid wasting product and over-applying in certain areas. Use circular motions to ensure even application.
Blend the self-tanner into the skin using a light touch to avoid streaks or uneven patches.
Pay extra attention to areas like elbows, knees, and ankles where the skin is drier and can absorb more self-tanner.
With proper maintaining, they can last for multiple uses and provide a consistent, natural-looking result.
Use light pressure and make sure to blend the self-tanner evenly. Work in small sections of your body at a time.
How to clean a velvet tan mitt?
Rinse the mitt under warm water to remove excess self-tanner.
Apply a small amount of mild soap or detergent to the mitt.
Gently rub the mitt to remove any remaining self-tanner.
Rinse the mitt thoroughly with warm water. Squeeze out any excess water and let the mitt air dry.
Store the mitt in a cool, dry place when not in use.
Avoid fabric softeners or bleach when cleaning the mitt, as they can damage the velvet material.
Replace the mitt when it begins to show signs of wear and tear.
Dual-sided tanning mitts are used for applying self-tanner evenly onto the skin.
These mitts typically have a smoother and a more textured side, allowing users to customize the application to their preferences.
Dual-sided tanning mitts allow for customizable application based on user preferences.
These mitts provide a barrier between the hands and the self-tanner, preventing orange palms and a streaky application.
The texture on the dual-sided mitts allows for better application on hard-to-reach areas like ankles and elbows.
Dual-sided mitts are generally more hygienic than using hands to apply self-tanner.
On the other hand, dual-sided tanning mitts can be more expensive than other application tools like gloves or brushes.
The texture on the dual-sided mitts can sometimes leave streaks or uneven application if not used correctly.
These mitts can become dirty quickly and require frequent cleaning.
Start applying with a dual-sided mitt from the bottom and working your way up.
Use the smoother side of the mitt for larger areas like arms and legs and the more textured side for harder-to-reach areas like ankles and elbows.
Use light, gentle pressure to avoid streaks and ensure an even application.
Allow the self-tanner to dry completely before dressing or getting into bed.
After each use, rinse the dual-sided mitt thoroughly with warm water and wring out excess water.
Use a gentle soap or detergent to wash the mitt by hand or in a washing machine, and air drying.
Silicone tanning mitts offer several benefits over traditional mitts made from other materials.
The silicone material helps to distribute the product smoothly and evenly, resulting in a streak-free tan.
Silicone tanning mitts are more durable and long-lasting compared to other mitts.
They are easy to clean and don’t absorb product, that prevents wastage.
They also provide excellent grip and control, making the application process more precise.
To prevent wastage, apply your self-tanner to the mitt and then use it to apply it to your skin.
It will help ensure you are applying an even amount and prevent staining on your hands.
Also, use a light hand when applying your self-tanner, as heavy pressure can result in streaking or uneven coverage.
The main disadvantage of silicone tanning mitts is that they can be more expensive than other types of mitts.
Aside from that, they can be slippery when wet, making them more challenging to use in the shower or bath.
After use, rinse the silicone tanning mitt with warm water and mild soap to remove any excess self-tanner and allow air drying before storing it.
Silicone tanning mitts are a good investment for anyone who loves a flawless, streak-free self-tan.
They are easy to use and clean, and provide a precise application.
Remember, cleaning a tanning mitt is crucial to maintaining your tan and keeping your skin healthy.
Clean your tanning mitt after each use to prevent bacteria buildup and ensure a smooth, streak-free tan every time.
Don’t miss these topics: